SDS - Combo Bamboo Enzyme Scrub

SKIN BLENDS® SAFETY DATA SHEET (SDS)

Prepared According to OSHA Hazard Communication Standard (29 CFR 1910.1200) and the Globally Harmonized System (GHS)

SECTION 1 – IDENTIFICATION

Product Name: Combo Bamboo Enzyme Scrub

Product Code: CBES

Product Description: Water-based facial exfoliating scrub formulated with biodegradable bamboo exfoliants, enzymes, humectants, and skin-conditioning ingredients to gently cleanse, exfoliate, and refresh the skin. Suitable for professional and consumer cosmetic use.

Recommended Use: Professional and consumer cosmetic facial cleanser.

Restrictions on Use: For external cosmetic use only. Not intended for ingestion.

Manufacturer:

Skin Blends LLC

1260 West Guin Road Springfield, MO 65807 USA

Phone: (877) 754-6253

Website: SkinBlends.com Email: orders@skinblends.com

Emergency Telephone: (877) 754-6253 (Business Hours: 8:00 AM–5:00 PM CST)

After Hours Emergency: Call Poison Control Center (800) 222-1222 or 911.

SECTION 2 – HAZARD IDENTIFICATION

GHS Classification: Not Classified as Hazardous under OSHA Hazard Communication Standard (29 CFR 1910.1200).

Signal Word: None

Hazard Statements: None required GHS Pictograms: None Required Precautionary Statements:

Prevention

Use only as
Avoid unnecessary contact with
Keep out of reach of
Observe good industrial hygiene practices during manufacturing and

Response

Eyes: If product enters the eyes, rinse thoroughly with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. If irritation persists, seek medical attention.

Skin: If irritation develops, discontinue use and wash affected area with soap and water. Seek medical advice if irritation persists.

Ingestion: Rinse mouth with water. Do not induce vomiting unless directed by medical personnel. Contact a physician or Poison Control Center if large quantities are swallowed or symptoms develop.

Storage

Store in accordance with Section 7 of this Safety Data Sheet.

Disposal

Dispose of contents and container in accordance with applicable federal, state, and local regulations.

Other Hazards:

Direct contact with the eyes may cause temporary
Individuals with sensitivities to cosmetic ingredients, botanical extracts, fragrances, or preservatives may experience skin irritation or allergic reactions.
No other hazards are known under normal conditions of

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

Substance/Mixture: Mixture

Product Description: Water-based cosmetic formulation containing a blend of cosmetic ingredients, which may include humectants, emollients, surfactants, botanical extracts, vitamins, peptides, polymers, preservatives, antioxidants, pH adjusters, and other cosmetic ingredients intended for topical skin application.

Hazardous Ingredients

This product is not classified as hazardous under the OSHA Hazard Communication Standard (29 CFR 1910.1200). No hazardous ingredients are required to be disclosed for hazard classification purposes.

SEE INGREDIENT CHART ON NEXT PAGE. Ingredients are listed in descending Order of Predominance. Chemical Abstracts Service (CAS) Registry Numbers are recommended for hazardous ingredients and may be included for non-hazardous ingredients at the manufacturer's discretion.

Trade Secret

Specific chemical identities and/or exact concentrations may be withheld as trade secrets in accordance with applicable federal regulations where permitted.

Combo Bamboo Enzyme Scrub

Ingredient (INCI Name)	CAS Number	Concentration
Water	7732-18-5	Proprietary
Bambusa Arundinacea Stem Extract	91771-33-4*	Proprietary
Acrylates Copolymer	25133-97-5*	Proprietary
Glycerin	56-81-5	Proprietary
Betaine	107-43-7	Proprietary
Cocamidopropyl Hydroxysultaine	68139-30-0	Proprietary
Propanediol (1,3-Propanediol)	504-63-2	Proprietary
Glyceryl Laurate	142-18-7	Proprietary
Butylene Glycol	107-88-0	Proprietary
Tremella Fuciformis Sporocarp Extract	Proprietary / Supplier Specific	Proprietary
Panthenol	81-13-0	Proprietary
Saccharomyces/Copper Ferment	Proprietary / Supplier Specific	Proprietary
Saccharomyces/Manganese Ferment	Proprietary / Supplier Specific	Proprietary
Saccharomyces/Zinc Ferment	Proprietary / Supplier Specific	Proprietary
Hydroxypropyl Guar	39421-75-5	Proprietary
Phenoxyethanol	122-99-6	Proprietary
Sodium Hydroxide	1310-73-2	Proprietary
4-Hydroxyacetophenone	99-93-4	Proprietary
Ethylhexylglycerin	70445-33-9	Proprietary
Ascorbic Acid	50-81-7	Proprietary
Bromelain	9001-00-7	Proprietary
Tocopheryl Acetate (Vitamin E Acetate)	7695-91-2	Proprietary

SECTION 4 – FIRST AID MEASURES

Description of First Aid Measures

Eye Contact

Immediately flush eyes with plenty of water for at least 15 minutes, holding the eyelids open to ensure thorough rinsing. Remove contact lenses, if present and easy to do, and continue rinsing. If irritation persists, seek medical attention.

Skin Contact

Wash affected area thoroughly with soap and water. Discontinue use if irritation develops. If redness, irritation, or rash persists, seek medical advice.

Inhalation

Inhalation exposure is not expected under normal conditions of use. If irritation occurs from mists or vapors during manufacturing or bulk handling, move the affected person to fresh air. Seek medical attention if symptoms persist.

Ingestion

Rinse mouth thoroughly with water. Do not induce vomiting unless directed to do so by medical personnel or a Poison Control Center. Never give anything by mouth to an unconscious person. Contact a physician or Poison Control Center if large quantities are swallowed or if symptoms develop.

Most Important Symptoms and Effects, Both Acute and Delayed

Temporary eye irritation, redness, or discomfort following direct eye
Mild skin irritation or allergic reaction may occur in sensitive
No significant adverse effects are expected when the product is used as

Indication of Immediate Medical Attention and Special Treatment Needed

Treat symptomatically. No specific antidote is known. Medical attention is generally not required under normal conditions of use unless symptoms persist or worsen.

SECTION 5 – FIRE-FIGHTING MEASURES

Suitable Extinguishing Media

Use extinguishing media appropriate for the surrounding fire, including:

Water spray or water fog
Dry chemical
Carbon dioxide (CO₂)
Alcohol-resistant foam or regular foam, as appropriate

Unsuitable Extinguishing Media

No specific extinguishing media are known to be unsuitable for this product.

Specific Hazards Arising from the Product

The finished product is not expected to present unusual fire or explosion hazards under normal conditions of storage and use.
Containers exposed to excessive heat may rupture due to pressure
During a fire, hazardous decomposition products may be

Hazardous Combustion Products

Thermal decomposition or combustion may produce:

Carbon monoxide (CO)
Carbon dioxide (CO₂)
Smoke
Irritating or toxic vapors, depending on surrounding fire conditions

Special Protective Equipment and Precautions for Firefighters

Wear self-contained breathing apparatus (SCBA) and full protective firefighting equipment when fighting fires involving this product.
Cool fire-exposed containers with water spray if it can be done
Avoid inhalation of combustion

SECTION 6 – ACCIDENTAL RELEASE MEASURES

Personal Precautions, Protective Equipment, and Emergency Procedures

Product is not expected to present a significant hazard under normal conditions of
Avoid unnecessary contact with
Wear appropriate personal protective equipment (PPE), such as safety glasses and protective gloves, when handling large quantities during manufacturing or spill cleanup.
Exercise caution, as spilled product may create a slippery

Environmental Precautions

Prevent large quantities of product from entering drains, storm sewers, waterways, or the
Dispose of waste in accordance with applicable federal, state, and local

Methods and Materials for Containment and Cleaning Up

Contain the spill if it can be done
Absorb spilled product with an inert absorbent material such as paper towels, absorbent pads, sand, vermiculite, or other suitable absorbent material.
Collect absorbed material in an appropriate waste container for
Wash the affected area thoroughly with water to remove any
Use caution during cleanup, as surfaces may become

Reference to Other Sections

Refer to:

Section 8 for recommendations on personal protective
Section 13 for disposal

SECTION 7 – HANDLING AND STORAGE

Precautions for Safe Handling

Use in accordance with the product
For external cosmetic use
Avoid unnecessary contact with
Do not
Wash hands after handling bulk product during
Use good industrial hygiene and manufacturing
Keep containers tightly closed when not in use to prevent
Avoid contamination of the product during manufacturing, filling, and

Conditions for Safe Storage

Store in the original, tightly closed
Store in a cool, dry, well-ventilated
Recommended storage temperature: 15–30°C (59–86°F).
Protect from freezing and excessive
Protect from direct sunlight and prolonged exposure to elevated
Keep container tightly closed when not in
Keep out of reach of
Rotate inventory using good inventory management practices (e.g., FIFO).

Incompatible Materials

Strong oxidizing agents
Strong acids
Strong alkalis
Materials known to adversely react with cosmetic ingredients

Special Storage Considerations

No special storage requirements beyond those recommended for normal cosmetic products.

SECTION 8 – EXPOSURE CONTROLS / PERSONAL PROTECTION

Occupational Exposure Limits

No ingredients are subject to OSHA exposure limits in normal cosmetic use.

Engineering Controls - General room ventilation.

Personal Protective Equipment

Eye Protection - Safety glasses during manufacturing.

Hand Protection - Chemical resistant / protective gloves during manufacturing.

Skin Protection - Lab coat or protective clothing during manufacturing.

Respiratory Protection - Not normally required.

General Hygiene - Wash hands after handling.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Opaque Gel with Exfoliating Particles

Color: Light Beige

Odor: Mild Characteristic

Physical State: Gel

pH: 5,0 – 6.5

Melting/Freezing Point: Not Determined

Initial Boiling Point/Boiling Range: Not Determined

Flash Point: Not Applicable (for non-flammable water-based products)

Evaporation Rate: Not Determined Flammability: Not Classified Vapor Pressure: Not Determined Vapor Density: Not Determined

Relative Density/Specific Gravity: 1.02 – 1.06

Water Solubility: Soluble

Partition Coefficient (n-octanol/water): Not Determined Auto-Ignition Temperature: Not Determined Decomposition Temperature: Not Determined Viscosity: Thick granular scrub

Volatile Organic Compounds (VOC): Negligible

Explosive Properties: Not Applicable

Oxidizing Properties: Not Applicable

SECTION 10 – STABILITY AND REACTIVITY

Stable under normal conditions. Avoid freezing and strong oxidizers. Hazardous decomposition may produce carbon oxides.

Reactivity: No hazardous reactions under normal use expected Chemical Stability: Stable under recommended storage conditions Possibility of Hazardous Reactions: None known.

Conditions to Avoid: Extreme Heat and Freezing

Incompatible Materials: Strong oxidizing agents

Hazardous Decomposition Products: Carbon monoxide and Carbon dioxide

SECTION 11 – TOXICOLOGICAL INFORMATION

Likely Routes of Exposure

Eye Contact
Skin Contact
Inhalation (during manufacturing or bulk handling only)
Ingestion

Symptoms Related to Physical, Chemical and Toxicological Characteristics

Direct eye contact may cause temporary irritation, redness, or discomfort. Prolonged or repeated skin contact may cause mild irritation or dryness in sensitive individuals. Individuals with sensitivities or allergies to botanical ingredients may experience skin irritation or allergic reactions.

Delayed and Immediate Effects: No significant adverse health effects are expected when the product is used as intended for cosmetic purposes.

Acute Toxicity: Not expected to present an acute toxicity hazard under normal conditions of use.

Skin Corrosion/Irritation: Not expected to cause skin corrosion. Mild irritation may occur in sensitive individuals.

Serious Eye Damage/Eye Irritation: Direct contact with the eyes may cause temporary irritation. Effects are expected to be reversible.

Respiratory or Skin Sensitization: Not expected to cause respiratory sensitization. Contains botanical ingredients that may cause skin sensitization or allergic reactions in susceptible individuals.

Germ Cell Mutagenicity: No data available. Not expected to present a hazard under normal conditions of use.

Carcinogenicity: This product is not expected to present a carcinogenic hazard.

Reproductive Toxicity: Not expected to present a reproductive hazard.

Specific Target Organ Toxicity (Single Exposure): No known significant effects. Specific Target Organ Toxicity (Repeated Exposure): No known significant effects. Aspiration Hazard: Not expected to present an aspiration hazard.

Medical Conditions Aggravated by Exposure: Pre-existing skin allergies or sensitivities to cosmetic ingredients or botanical extracts may be aggravated by exposure.

SECTION 12 – ECOLOGICAL INFORMATION (Non-Mandatory Under OSHA)

Ecotoxicity

The product is not expected to present significant environmental hazards under normal conditions of use or disposal.

Persistence and Degradability

Many ingredients are expected to be biodegradable. No specific data are available for the finished product.

Bioaccumulative Potential

The finished product is not expected to bioaccumulate significantly in the environment.

Mobility in Soil

The product is expected to be mobile in soil due to its water solubility.

Other Adverse Effects

No known significant adverse environmental effects are expected when used and disposed of as intended.

SECTION 13 – DISPOSAL CONSIDERATIONS (Non-Mandatory Under OSHA)

Disposal Methods

Dispose of unused product, spilled material, and contaminated absorbent materials in accordance with applicable federal, state, and local regulations.

Container Disposal

Empty containers may retain product residue. Dispose of containers in accordance with applicable federal, state, and local regulations. Do not reuse containers for food, beverages, or other consumer products unless they have been properly cleaned and are intended for such reuse.

Special Disposal Considerations

No special disposal methods are required under normal conditions of use. Avoid releasing large quantities of product directly into drains, surface waters, or the environment.

SECTION 14 – TRANSPORT INFORMATION (Non-Mandatory Under OSHA)

Department of Transportation (DOT) Classification (Shipping Name): Not Regulated United Nations (UN) Number: None

Hazard Class: Not Applicable Packing Group: Not Applicable

International Maritime Dangerous Goods (IMDG) Classification: Not Regulated International Air Transport Association (IATA) Classification: Not Regulated

SECTION 15 – REGULATORY INFORMATION (Non-Mandatory Under OSHA)

Federal Regulations: Complies with Occupational Safety and Health Administration (OSHA) Hazard Communication Standard. Ingredients are Toxic Substances Control Act (TSCA) compliant or exempt.

State Regulations: No known additional requirements.

California Proposition 65: This product is not known to require a Proposition 65 warning based on current ingredient information.

Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III (Emergency Planning and Community Right to Know Act EPCRA): No reportable ingredients.

Other Regulatory Information

FDA: Manufactured for cosmetic use in accordance with applicable U.S. cosmetic regulations.

SECTION 16 – OTHER INFORMATION

Revision Date: July 1, 2026

Revision Number: 2026-01

Prepared By: Skin Blends LLC – Regulatory Affairs

Reason for Revision: Updating and standardizing all Skin Blends Safety Data Sheets to ensure consistency with current OSHA, GHS, and company documentation requirements.

Disclaimer

The information contained in this Safety Data Sheet is believed to be accurate and is provided in good faith based on information available at the time of preparation. It is intended solely as guidance for safe handling, use, processing, storage, transportation, disposal, and release of the product. It is not intended as a warranty or quality specification. Users are responsible for determining the suitability of this product for their specific application and for complying with all applicable federal, state, and local laws and regulations.